FT-818: Allmode QRP-Transceiver for shortwave and 6m/2m/70cm
Small handy allmode QRP transceiver, all bands from 160m to 70cm, maximum 6 Watt output power, built-in battery compartment, 2 switchable antenna connectors, 9k6 packet connector. The device is characterized by simple menu navigation, switchable antenna connections and 4 switchable power levels. While portable the device can be operated with rechargeable or alkaline batteries, the scope of delivery includes a rechargeable battery with 9.6V/1900mAh. Of course, the FT-818 also has a built-in telegraphy keyer.
Over the years, Yaesu has changed and improved the transceiver in several steps. The first FT-817 has been manufactured since 2000, since 2004 the model FT-817ND has been introduced. The innovations were among other things a battery with 1400 mAh and a charger. Since 2018 the FT-818 has replaced the popular compact transceiver. The changes included a larger battery, a slightly increased transmission power and the already installed TCXO.
- 4 power levels 6/2.5/1/0.5 Watt
- CW/SSB-Filter optional
- Connector for PSK31 / 9k6-Packet
- Built-in TCXO-9
- 60m Band ready
- Continous receive range on shortwave from 100 kHz on, incl. WFM rx
- Selectable display color blue/amber
- Scope monitor
- Voltage monitor
- 200 memories
- Dual Watch Function
- CAT interface
- MH-31A8J handheld microphone
- PA-48C Wall charger
- SBR-32MH NiMH battery 9.6V, 1900 mAh
- FBA-28 Battery case for 8xAA Batteries
- EDC-6 12V DC cable
- YHA-63 BNC antenna (3 parts)
- Carrying Strap
- Printed User Manual (german) 
- Various small items (ferrite, rubber feet etc)
 Non-german speaking customers are supplied with a download link for manuals in other languages (PDF format, english, french, spanish, italian).
|FT-818||6 W QRP HF/VHF/UHF Transceiver||695.00 €||Add to shopping cart||In stock, shipped in 1 or two days. ⓘ|
|99FREQ||Frequency Extension Please see note!||25.00 €||Add to shopping cart||In stock, shipped in 1 or two days. ⓘ|
|Info freight charges|
Accessories FT-817 / FT-817ND / FT-818
Desk stand for FT-817ND / FT-818
Useful desk stand for FT-817 / FT818ND (all models). The stand is made from solid, thick-walled plastics which makes it very sturdy. Cuts at all the right places allow easy access to all connections. All in all such a desk stand makes the FT-817 much easier to operate when sitting on a desk - and it's nice looking too! Colour: black.
|F817-BASE||Desk stand for FT-817 (black)||34.00 €||Add to shopping cart||In stock, shipped in 1 or two days. ⓘ|
|Info freight charges|
Special accessories for FT-817 and FT-818
Due to the amount of available accessories for the FT-817 and other Yaesu mobile radios, we have put all these product on a separate Yaesu Accessories Page.
Carry your radio on planes, trains, or on your back.
Holds all mobile radios built in the last 10 years, and specifically designed with the newer HF mini mobiles in mind such as the FT-100 or the IC-706. Also works beautifully carrying the FT-817 along with the Z-11 antenna tuner.
Overall dimensions of the pack: 17" H x 8" W x 3" D.
- Inside dimensions of upper radio compartment: 11½" H x 7½" W x 2.5" D.
- Inside dimensions of the lower power supply compartment: 4½" H x 7½"W x 2½"D
*These are "soft" dimensions. The WorldPack is not a hard box, but is constructed of soft padded fabric. Therefore, if your radio is slightly larger in one dimension or another, the pack can still fit quite well.
There is a clever "elevator" in the upper portion of the pack, that can adjust the height of the radio in your pack. This allows you to raise or lower your radio within the pack, or accommodate shorter radios securely within the pack.
Heavy duty, weather resistant nylon exterior, padded throughout to protect delicate electronic instruments. Contoured shoulder straps keep you cool with their mesh construction. Multiple tie-down points to attach whatever you need to bring along. Shoulder straps have webbing loops to attach your handheld radio in an upright position, and easy to reach by your chest. Higher on the shoulder strap is a point to attach your GPS receiver, so that the antenna gets a full sky view to avoid receiver drop-outs.
Separate lower compartment for power supply with passthrough holes for wiring. To keep your signal clear on those windy mountaintops, we've thrown in a fleece microphone cover to virtually eliminate wind-noise in your mic. Exterior pockets, straps and sleeves for multiple antenna elements with a little extra room for your favorite fishing rod.
Looking down from the top, alongside the right hand side of the pack, you can see that the antenna is held securely in place by a pocket at the bottom, and two Velcro style tie-downs along the body of the pack. The left hand side can carry the extra antennas with an identical pocket at the bottom and an adjustable nylon sleeve running the height of the pack.
The contoured shoulder straps are comfortable and cool for long wear. Webbing cross straps give you a place to attach your handheld, GPS, or other handheld device in antenna-up position. There are other nice little details like the D-ring on the strap adjustment to keep dangling loose strap ends from tickling your arm as you maneuver.
|PPS-WPACK||81.40 €||Add to shopping cart||In stock, shipped in 1 or two days. ⓘ|
|Info freight charges|
Frequency Extension for RadiosPlease note:
All radios supplied by WiMo normally cover only the amateur bands (transmit wise).
The frequency extension of a radio (TX open) is done on explicit request by the customer.
Amateur Radio transceivers are usually not specified for use outside the amateur bands. In some cases the radio and especially the final amplifier or output filters can be damaged when transmitting outside the amateur bands. These damages are not covered by any warranty.
The manufacturer warranty might be voided in some cases as well.